MHSP-TF1 Hot Static Hybrid:
Jet Wash / Steam Cleaner
Morclean’s new ThermaFlow low-flow hot water pressure washer is an innovative machine with a reduced flow rate. Producing a combination of high-pressure water and steam, the ThermaFlow uses just 7.5 litres of water per minute. This is half the water consumption or less than that of a standard high-pressure cleaner, that would produce between 14 and 21 litres per minute. This results in reduced water for sites where drainage is limited or water reclaim is required.
If there is no foul drain, there are two options because the wastewater/wash water must NOT enter a surface drain storm drain or soakaway. With the ThermaFlow there is either a) less water to tanker away, or b) less water to be recycled if you’re using only half the water. Less water means less cost and use of water, and less water to buy-in, making the ThermaFlow energy saving, green and efficient.
The Morclean ThermaFlow MHSP-TF1 comes with the below standard features:
- Full frost protection and cabinet lagging
- Efficient M2 boiler system
- Double spiral M2 coil
- Automatic stop/start system
- Chemical system
- Professional Interpump with ceramic pistons
- Industrial 1450rpm 4 pole electric Nicolini Motor
- Flame failure and leak detection system
- 16lt fuel tank with low-level sensor
- Burner control with flow switch and thermostat
- 24v low tension safety controls
- Mains power on lamp
Technical Specification
Contractor Plus 170
Type: Static
Delivery rate: High Pressure
Water Flow: 7.5 litres per minute
Pressure: 200bar, 3000psi
Motor Specification: 7.5hp, 1450rpm
Shutdown System: Auto stop/start
Temperature: 0-100°C
Power: 415V
Weight: 250 Kg
Agricultural Cleaning
Mud, cow pat and more can build up on agricultural equipment over time and can be a real pain to clean, the MSSPW Range is perfect for effortlessly blasting off dirt and grime. Not only effective on farm machinery but also on things like stables and pens, horse boxes, silos, tanks and milking sheds too.
Industrial Cleaning
These super strong machines are perfect for those working in the industrial sector. With various dirt and debris around, these powerful machines are ideal for taking on the tough jobs of cleaning built up equipment, machines, housings, piping, vehicles and more.
More Applications
Blast away that built up dirt and debris from heavy duty machines and equipment with this diesel engine, electric start, hot water pressure washer from Morclean. Great for when cleaning heavily soiled machines and equipments is a regular task.
How do I Choose My Pressure Washer?
A pressure washer’s performance is measured in both pressure and flow – Both of these are important.
You also need to consider where you will be using the machine, what application you will be using it for and the amount of usage required.
How Does a Pressure Washer Work?
A pressure washer consists of a pump and a motor. The motor drives the pump which applies pressure on the water. As the water is under pressure, it is pumped out at high speed. This effect is very similar to pinching the end of a garden hose. The pump ensures a constant amount of water is produced, the water pressure can be varied by altering the size of the nozzle at the end of the lance.
What is Mobile Pressure?
Mobile units for cleaning on demand, and developing pressures of up to 5000psi. Machines can be fixed or static. Traditional high pressure cleaners are often mobile units, and can be connected to services each time the operators needs to operate.
The operator then has access to settings including the detergent, flow, temperature and pressure
