Oil Safe Separators
The Oil Safe range of separators are designed where free floating oils are present and outflow typically from yards, hardstandings or higher risk areas can outflow to surface drains or watercourses.
Constructed from GRP they are available as a standard supply for areas of between 200M2 and 5500M2 or built to order for bespoke or specialist applications.
The tanks are designed for where there is a risk of contamination with oil or a foreseeable risk of significant spillages, such as a breakers yard, maintenance facility or an area where oils are stored.
Our oil Safe separators have at least one 600mm access chambers so that when installed they are neatly concealed yet accessible, under a standard 600mm cover and lid*
| Dia (mm) | made to order |
| Inlet | 110/150/200 |
| Height (mm) | made to order |
| M2 area | 200 to 5500M2 |
| Invert levels | made to order |
In applications where the outflow is higher than the tank, the outflow is higher than the tank, the separator can be used in conjunction with a Morclean pumping chamber or pumping station.
Specification and technical details are available on request.
Please note the oil separators are not suitable for vehicle wash bay applications.
PDF Downloads
About OilSafe Separators
Click the PDF icon to view information about our Oil Safe Separators.
(185Kb)
Please note: This item requires frames and manhole covers
The above requires manhole cover(s) and lid(s) (not included). Due to the weights involved covers and lids are expensive to transport and often cost more to ship than they are worth so we advise you source your own. You can purchase covers and lids from most builders merchants and below is a guide to assist you choosing the best type for the duty.
| Type | Size (mm) | Duty | European Standard | Loading | Typical Overground |
| Class A15 | 600 x 450 | Light | BS EN 124 | 3 tonne (approx) | Cars/Small Vans |
| Class B125 | Medium | 17 tonne (approx) | Cars/Small Commercial | ||
| Class D400 | Heavy | 38 tonne (approx) | Large Commercials/HGV |
The EA and SEPA Pollution Prevention Guidelines (PPG) which are jointly produced by the Environment Agency for England and Wales, the Scottish Environment Protection Agency, and the Environment and Heritage Service for Northern Ireland (Ref PPG3 / PPG13 / PPG4 / PPG 14) suggest that Class 2 wash bay silt traps and interceptors should be connected only to a mains foul drain, and Class 1 separators to surface drain.
The above assumes you have the consent to connect any outflow to a suitable drain as per the appropriate PPG Guideline. While we always endeavour to provide best advice and accurate information, it the responsibility of the client and/or landowner to comply with the law. Following any guideline doesn’t remove your responsibility to comply with the law and prevent pollution from your activities. Causing or allowing pollution is a criminal offence; compliance with any guidance isn’t a defence. You should make sure that the references to other sources of guidance are still current.
Click below to view our full product guide. (opens in a new window)
Morclean’s quality administration systems have been assured and approved to the standards and guidelines of BS EN ISO 9000:2015 for the sales, service and hire of industrial cleaning equipment.
Our registration no. is 94/121120 and our standards and guidelines are externally audited by CIS.
- Please note that many models described on this website are bespoke, and as such cannot always be accurately depicted.
- All photographs and illustrations displayed on this website are representative of model ranges or a model series only. Individual models and specifications may vary from those shown.
- Please contact us if you require clarification or individual specifications of any equipment. Morclean reserve the right to update and amend the specification of our equipment and accessories without notice and in the interest of the customer.
- Images or specifications must not be reproduced with express written consent from Morclean Ltd.
- Any prices quoted are subject to VAT @ SR. E &OE
