Morclean Hydra HC35/50/75 Water Recycling System
The tanks are fabricated in either polypropylene or stainless steel grade 304D. They are skid mounted with a base plate to form a compact
unit of either open construction or they can be supplied fully enclosed with doors.
The particular reclaim unit needed is specified according to the water usage of the washing machine in gallons or liters per minute i.e a rollover wash machine using a total of 32 GPM would need a Hydra 35 to match this usage. The tanks are fabricated in either polypropylene or stainless steel grade 304D. They are skid mounted with a base plate to form a compact unit of either open construction, or they can be supplied fully enclosed with doors.
- Can permit washing during water shortages
- Protects site income and car wash
- Increases water cost reduction
- Helps save the environment by reducing water consumption and pollution
- Includes spotless rinse system which reduces spotting and streaking compared with mains water washing
- Includes water storage tanks
Water Recycling Systems
Water Recycling Systems
Technical Specifications
Morclean Hydra HC35
Flow Rate: 160 LPM/35 GPM
Tank Capacity: 1475 litres/328 gallons
Weight (Empty): 700kg
Weight (Full): 2500kg
Suction Line Lenght: 20 Metres
O/A Dimensions: 2400 x 1200 x 1500
Technical Specifications
Morclean Hydra HC50
Flow Rate: 230 LPM/50 GPM
Tank Capacity: 1475 litres/328 gallons
Weight (Empty): 800kg
Weight (Full): 2600kg
Suction Line Lenght: 30 Metres
O/A Dimensions: 2400 x 1200 x 1500
Technical Specifications
Morclean Hydra HC75
Flow Rate: 345 LPM/75 GPM
Tank Capacity: 2200 litres/492 gallons
Weight (Empty): 1200kg
Weight (Full): 3900kg
Suction Line Lenght: 30 Metres
O/A Dimensions: 3600 x 1200 x 1500
Water that is used during the vehicle washing and rinsing cycles is gathered in the below ground collection tank. Absorbent cellulose pads, which are located in the settlement tank, remove the oil present during vehicle washing operations. Floating coarse debris is trapped and settlement of grit and coarse sandy material also occurs in the settlement tank.
Water is drawn from the third chamber of the collection tank and is then passed to the multi-cyclone which separates particles larger than 20 microns and rejects them with a small quantity of water back to the collection tank. The cleaned water in the above-ground unit is then passed through the activated carbon filter which removes detergent.
The water is drawn from the Hydra unit by the wash machine pump.
Please note: All detergents should be of a non-ionic or anionic type and have a neutral pH at working solution strengths. If the RO spot free rinse is specified the RO water is supplied either direct to two nozzles mounted on the wash bay screen or through the washing machine itself.
Got a question? Email us at info@morclean.com
Click to download PDF – Morclean Hydra HC 35 ,50,75
